JMU Stainless Alloys Pvt. Ltd. is one of the well-known exporters of Stainless Steel 304H Pipes and Tubes , which cannot be hardened by heat treatment and can be hardened by cold working. It is often used in Cooling towers, Steam exhausts, Electric generation plants, and also on occasion that will be found in fertilizer and chemical plants.
However, because of its high carbon content, these Stainless Steel 304H Tubes from JMU Stainless Alloys Pvt. Ltd. is subject to carbide precipitation in the heat affected zone of welds. It is very good in a wide range of atmospheric environments and many corrosive media. These SS 304H Pipes is recommended for use in ASME pressure vessels in working service above 525 Degree C due to the grade's heat resistant properties. This high carbon content grade is susceptible to sensitisation if held in the temperature range of about 450 Degree C - 850 Degree C.
These SS 304H Tubes from JMU Stainless Alloys Pvt. Ltd. must contain not less than 0.04 percent carbon, or more than 0.10 percent. It is used as a material of construction up to 1500 Degree F, where slight scaling begins at about 1200 Degree F. These Alloy 304H Pipes are subject to work hardening during deformation and also subject to chip breaking. JMU Stainless Alloys Pvt. Ltd. also offer the same in different sizes, shapes and designs as per clients’ specifications at reasonable price.
Steel WNR 1.4301 Fabricated Pipe stockist rs, SS 304H Capillary Tubes, Stainless S30409 Round Tubes, 304H Square Pipes, Steel 304H Electropolished Tubes, Steel 304H ERW Tubes, 304H EFW Pipes Exporters in India.
| GRADES | 304H UNS S30409 / WNR 1.4301 |
| STANDARD | ASTM A213, A249, A269, A312, A358 / ASME SA213, SA249, SA269, SA312, SA358. |
| TYPE | Seamless, Welded, Fabricated, ERW, EFW |
| FORM | Round, Square, Rectangular, Hydraulic, Oval Pipes & Tubes, Galvanized Pipes & Tubes etc |
| SIZE | 1/8″NB TO 30″NB IN |
| SCHEDULE | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| LENGTH | Single Random, Double Random & Cut Length |
| END | Beveled End, Plain End, Treaded |
| STANDARD | UNS | WERKSTOFF NR. |
| SS 304H | S30409 | 1.4301 |
